Nokia X2-00 Charging Solution Guide

Electronics Circuit Application

Nokia X2-00 Mic solution guide.

10Watt Audio Amplifier with Bass boost circuit.

Circuit diagram

parts list 

P1_________________22K   Log.Potentiometer (Dual-gang for stereo)
P2________________100K   Log.Potentiometer (Dual-gang for stereo)
R1________________820R   1/4W Resistor
R2,R4,R8____________4K7  1/4W Resistors
R3________________500R   1/2W Trimmer Cermet
R5_________________82K   1/4W Resistor
R6,R7______________47K   1/4W Resistors
R9_________________10R   1/2W Resistor
R10__________________R22   4W Resistor (wirewound)

C1,C8_____________470nF   63V Polyester Capacitor
C2,C5_____________100µF   25V Electrolytic Capacitors
C3,C4_____________470µF   25V Electrolytic Capacitors
C6_________________47pF   63V Ceramic or Polystyrene Capacitor
C7_________________10nF   63V Polyester Capacitor
C9________________100nF   63V Polyester Capacitor

D1______________1N4148    75V 150mA Diode

IC1_____________NE5532    Low noise Dual Op-amp

Q1_______________BC547B   45V 100mA NPN Transistor
Q2_______________BC557B   45V 100mA PNP Transistor
Q3_______________TIP42A   60V 6A    PNP Transistor
Q4_______________TIP41A   60V 6A    NPN Transistor

J1__________________RCA audio input socket

Power supply circuit

 

                                  Circuit diagram

Parts 

R11_________________1K5  1/4W Resistor

C10,C11__________4700µF   25V Electrolytic Capacitors

D2________________100V 4A Diode bridge
D3________________5mm. Red LED

T1________________220V Primary, 12 + 12V Secondary 24-30VA Mains transformer

PL1_______________Male Mains plug

SW1_______________SPST Mains switch .Electronics Circuit Application

TV signal amplifier 470Mhz-860Mhz circuit

This amplifier can amplify to 10dB the RF signal from antenna working as class A and is based on transistor BFQ34 of Philips. The transistor comes in case SOT122A. You may find the BFQ34T in market but better do not use it as it has different characteristics.Input signal should be about 10mW if we want 10dB output. So with 0.5mW we get 5dB. Do not overdrive the transistor because the signal will be distorted full of lines, without color etc. So use 12Volts with 1A stabilised power supply. The circuit should be enclosed in a small metal box. Electronics Circuit Application

                                  

MC34063 Voltage variable Regulator circuit

 

The circuit is a good battery. It is Control Volttage regulator Output 12V 1.5A , Input Voltage battery 5V-13V Only  Electronics Circuit Application

Simple Phone Tap Circuit.

This circuit is extremely simple, therefore there is less chance of any problems. It can be placed anywhere on the phone line and it will record any conversation on any phone on that line.
   
Part                         Total Qty.              Description

R1                            1                    470 Ohm 1/4 Watt Resistor   
R2                            1                    1K 1/4 Watt Resistor   
R3                            1                     100K 1/4 Watt Resistor   
R4                            1                    6K 1/4 Watt Resistor   
C1, C2                     2                    0.01 uF 100V Ceramic Capacitor   
K1                            1                    24VDC Reed Relay   
MISC                       1                    Wire, Headphone Plugs, Phone Plug Or Alligator Clips   

Electronics Circuit Application

Please note: I have received several emails saying that this circuit will not work and that it may hold your line off hook and to me it looks like it will (it would put quite a load on the phone line). For some, it has worked fine. Build at your own risk.

Colour (Sound) Organ Circuits.

 
                                                 circuit